924 924S 944 968 Antriebsrad für elektrisches Schiebedach
924 924S 944 968 Antriebsrad für elektrisches Schiebedach

924 924S 944 968 Antriebsrad für elektrisches Schiebedach

Angebotspreis£8.04 GBP
Antriebszahnrad (oder Zahnrad) für den elektrischen Schiebedach-Öffnungsmechanismus.

Dies passt auf alle Coupé-Modelle (nicht Cabrio) des Typs 924, 924S, 944 und 968, die werkseitig mit elektrischem Schiebedach ausgestattet sind. ... Read More
Menge:
Auf Lager

90-Tage-Rückgabe ohne Probleme | Schnelle Lieferung in Großbritannien und weltweit ab 6 £

Antriebszahnrad (oder Zahnrad) für den elektrischen Schiebedach-Öffnungsmechanismus.

Dies passt auf alle Coupé-Modelle (nicht Cabrio) des Typs 924, 924S, 944 und 968, die werkseitig mit elektrischem Schiebedach ausgestattet sind.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
James Andrews
924 Sun Roof

Parts arrived on time and are relatively simple to fit. Raise the roof slightly, manually if not operating. Remove the trim panel covering the curved arms which lift the roof. Carefully cut the roof lining to access the Drive mechanism. Remove the five cross head screws holding the cover and operating arm in place. The arm can then be removed. try pulling the worn gear wheel from it's mounting. If this does not work undo the two Allen screws to the rear of the gear housing., the assembly can then be pushed rearward allowing limited but sufficient room to use a long screw driver to push the rear of the gear wheel. Relocate the gear housing and fit the Allen screws. The new gears can then be pushed into the housing, close the roof and locate the lifting arms in the slots in the roof also engaging the serrated teeth in the gear. Refit the five cross head screws . At that stage carefully test the operation of the roof. repair the roof lining with black tape, replace the trim panel.