924 924S 944 968 rueda dentada de accionamiento del techo corredizo eléctrico
924 924S 944 968 rueda dentada de accionamiento del techo corredizo eléctrico

924 924S 944 968 rueda dentada de accionamiento del techo corredizo eléctrico

Precio de venta£8.04 GBP
Agotado
Piñón de accionamiento (o rueda dentada) para el mecanismo de accionamiento eléctrico de apertura del techo corredizo.

Se adapta a todos los modelos cupé (no cabrio) de 924, 924S, 944 ... Read More
Notify Me When Available

Devoluciones de 90 días sin objeciones | Entrega rápida en el Reino Unido y en todo el mundo desde £ 6

Piñón de accionamiento (o rueda dentada) para el mecanismo de accionamiento eléctrico de apertura del techo corredizo.

Se adapta a todos los modelos cupé (no cabrio) de 924, 924S, 944 y 968 fabricados con el techo corredizo eléctrico opcional de fábrica.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
James Andrews
924 Sun Roof

Parts arrived on time and are relatively simple to fit. Raise the roof slightly, manually if not operating. Remove the trim panel covering the curved arms which lift the roof. Carefully cut the roof lining to access the Drive mechanism. Remove the five cross head screws holding the cover and operating arm in place. The arm can then be removed. try pulling the worn gear wheel from it's mounting. If this does not work undo the two Allen screws to the rear of the gear housing., the assembly can then be pushed rearward allowing limited but sufficient room to use a long screw driver to push the rear of the gear wheel. Relocate the gear housing and fit the Allen screws. The new gears can then be pushed into the housing, close the roof and locate the lifting arms in the slots in the roof also engaging the serrated teeth in the gear. Refit the five cross head screws . At that stage carefully test the operation of the roof. repair the roof lining with black tape, replace the trim panel.